Rate this post

Are you facing trouble with your TV lately? Does your TV show new signs of damage now and then? Does seeking professional help bother you financially? Well, say goodbye to all your miseries as we have the perfect solution for you.

Fix your TV at home with the best solutions provided to you below. Consider them before taking your TV for professional help. The solutions provided below are sure to help you secure your TV once again.

Check for a power outlet

When it comes to DIY TV repair Toronto or TV repair Etobicoke, there are several details that you need to check. If you notice no sign of power or life in the TV, including the small light on the lower side, the problem could be the power outlet. In this case, get a lamp and disconnect your TV from the outlet.

Now, check if the outlet is giving out any power. Plug the lamp in it. If the lamp glows, move to the next step. However, if it does not, use a cord to plug the TV into some other outlet so that it can go back to working properly.

Reconnect the cables

If you have a modern TV or monitor then this issue could be the reason behind such inconvenience. When it comes to modern monitors, the wires get disconnected easily. They slide out of the socket quite smoothly. Moreover, this is a very common problem in TVs today.

The tricky part is, the wire would look like it is in place, however, it has slid out of the TV, resulting in a low-quality picture. One way to find out if this is the reason is when the TV is getting power but is showing “no signal” every time.

To solve the problem, unplug all the wires and reconnect them to their assigned sockets. But, make sure when you do so, the wires are plugged in more firmly than they were the last time. Only then would the solution work.

If the “no signal” sign still shows, you can try the same thing from the other end as well. Unplug cables from the devices providing signals and reconnect them firmly.

Turn off the cable box for a few minutes

The cable box in every TV plays a major role in the quality of the picture you receive. In case the connection from the cable gets lost, the TV would receive no signals at all. One solution to this could be rebooting the cable box.

Switch it off for a minute and switch it on again. Do the same thing with the TV as well. This would lead to cables establishing signals again and ending up fixing the TV.

In The End

Repairing a TV at home is no biggie if you use the right steps. Follow the methods mentioned above and fix your TV at home in no time. However, if these fail to help, contact an expert on TV repair such as TV Repair Company today. Call them to make an appointment or get a consultation via call. 

Leave a Reply

Your email address will not be published. Required fields are marked *